Table of Contents
Advertisement
JP-2300-MK ARM WALL MOUNTING KIT
NOTE: MOUNT HEATER AT MAXIMUM 30° ANGLE
Using pairs of holes in the heater
bracket allows heater orientation:
Horizontal
•
Angled at 30°
•
[MAXIMUM angle mount]
Assemble Mounting Bracket
to Mounting Arm using bolts
and nuts supplied:
Align the anchor holes in
•
the heater bracket and the
mounting arm, and insert a
bolt
Finger tighten nut on to
•
bolt to allow rotation of the
heater bracket
Align the desired mounting
•
angle holes in the heater
bracket to the outermost
holes in the mounting arm
Insert second bolt and fin-
•
ger tighten ONLY nut to
bolt
Horizontal mount
•
30° Angle mount
•
IMPORTANT
Install heater to mount-
•
ing bracket [4 studs /
nuts] BEFORE tightening
nuts on bolts to mounting
arm with wrench
Studs at top of heater to mounting bracket
16
2100 / IO-100 Manual
IM110107
RD: AUG 2021
R.L. 11A
Advertisement
Table of Contents
