Regulatory Information - Digi XB3-C-G1-UT-001 User Manual

Regulatory information

This section includes FCC and ISED regulatory information.
Antenna regulatory information: FCC and ISED
The equipment can be installed using antennas and cables constructed with non-standard connectors
(RPSMA, RPTNC, and so forth). An adapter cable may be necessary to attach the XBee connector to
the antenna connector.
The modules are approved by FCC and ISED for fixed base station and mobile applications for the
channels indicated in the tables below. If the antenna is mounted at least 21 cm from nearby persons,
the application is considered a mobile application.
The antennas below have been approved for use with this module. Digi does not carry all of these
antenna variants. Contact Digi Sales for available antennas.
Bluetooth antennas
The following antennas are approved for use with the Bluetooth radio by the FCC and by ISED.
Part number
31000022-01
A24-HASM-450
A24-HABUF-P5I
A24-HASM-525
FXP74.07.0100A
Digi XBee® 3 Cat 1 Smart Modem User Guide
Type (description)
Integral antenna
Dipole (Half-wave articulated RPSMA-4.5")
Dipole (Half-wave bulkhead mount U.FL w/ 5" pigtail) 2.0 dBi
Dipole (Half-wave articulated RPSMA-5.25")
Taoglas FXP74 Black Diamond 2.4GHz Band Antenna
Gain Application
-0.67 dBi Fixed/Mobile
2.1 dBi Fixed/Mobile
Fixed/Mobile
2.0 dBi Fixed/Mobile
4.0 dBi Fixed/Mobile
328