Laser Emission Area; Fd Direction; Cd Direction - Minolta magicolor 7300 Service Manual

FrameMaker Ver.6E (PC) magicolor 7300 MECHANICAL/ELECTRICAL
02.08.08
5-4.

Laser emission area

(1)

FD Direction

• The laser print timing determines the FD print start signal (/HSYNC) that is output from
the control board and the print start position for the width of the paper size.
• The laser emission area is determined by the paper size. However, 5 mm on both sides
of the paper is the void image area.
(2)

CD Direction

• The laser print timing determines the CD print start signal (/TOD) that is output from the
control board and the print start position for the length of the paper size.
• The laser emission area is determined by the paper size. However, 5 mm at the leading/
trailing edges is the void image area.
Void width: 5 mm
Void width: 5 mm
M-13
C4134S021AA