Removing The Control Panel - Minolta magicolor 7300 Service Manual

FrameMaker Ver.6E (PC) magicolor 7300 ASSEMBLY/DISASSEMBLY
02.08.08
(8)

Removing the Control Panel

1. Remove the Panel Cover.
4134D032AA
(9) Removing High Voltage Units 1 and 2
1. Remove the Left Cover.
2. Remove the Panel Cover.
3. Remove the Top Cover.
4. Remove the Rear Cover.
4134D156AA
4134D033AA
Precautions when installing High Voltage Unit 1
• Make sure that the contact on the High Voltage Unit 1 Board and the spring on back of
the main unit make a good connection.
• Do not bend the spring.
4134D034AA
2. Remove the flat cable, and Control Panel.
5. Remove three screws, and unplug one connec-
tor. Then remove the Print Unit Cooling Fan.
6. Remove all connectors on High Voltage Unit 1.
7. Remove four screws, and High Voltage Unit 1.
8. Remove all connectors on High Voltage Unit 2.
9. Remove six screws and High Voltage Unit 2.
D-17