FrameMaker Ver.6E (PC) magicolor 7300 ASSEMBLY/DISASSEMBLY
02.08.08
(12) Removing the Registration Sensor
1. Open the Front Door.
2. Remove the Print Unit.
E-10 (Maintenance schedule)
3. Remove the Transfer Belt Unit.
E-22(Maintenance schedule)
4. Remove the Controller Box.
D-8(Removal Procedure 1through 9for the Control Board)
CNCS
4134D080AA
4134D081AB
4134D082AB
4134D083AA
5. Unplug one connector on the Control Board.
6. Remove one screw, and the AIDC/Registration
Sensor mounting bracket.
7. Unplug one connector.
8. Remove two screws, and the AIDC/Registration
Sensor.
9. Unplug one connector.
10. Remove two screws, and the Registration Sen-
sor.
D-37