Minolta magicolor 7300 Service Manual page 112

FrameMaker Ver.6E (PC) magicolor 7300 MAINTENANCE
02.08.08
<Reinstallation Procedure>
NOTE
• Since the Imaging Unit is highly susceptible to light, keep it in its aluminum packaging
until immediately prior to installation. After removing the Print Unit from the aluminum
packaging, install it into the printer as soon as possible to avoid exposure to light.
• When replacing the Print Unit, be sure to replace the toner cartridge at the same time.
C4134o219AB
C4134o220AB
C4134o221AB
C4134o222AB
1. Hold the left and right ends of the new print unit,
warraped in the aluminum pack, and then turn the
Print Unit over toward you.
NOTE
• Do not turn the Print Unit over the left or right, oth-
erwise toner will spill out of the Print Unit.
2. Lightly shake the Print Unit five or six times to the
left and right.
3. Turn the Print Unit away from you and turn it over.
E-13