FrameMaker Ver.6E (PC) magicolor 7300 ASSEMBLY/DISASSEMBLY
02.08.08
(3)
Cleaning the Print Head Unit window surface
4134D114AA
(4)
Cleaning the AIDC Sensor
4134D025AA
(5)
Removing the Paper Feed Drive Motor
1. Remove the Left Cover.
2. Remove the Panel Cover.
3. Remove the Top Cover.
4. Remove the Rear Cover.
4134D075AB
1. Remove the Print Head Unit.
D-22
2. Using a dry cloth or cotton swab dampened with
alcohol, wipe clean the window surface.
1. Open the Front Door.
2. Turn the lever once or twice.
NOTE
• Leave the Print Unit and Print Unit Support Bar
mounted.
• The AIDC sensor is cleaned at the same time as
closing the print unit suppor lever because the
AIDC sensor cleaning lever synchronizes with the
print unit support lever.
5. Unplug one connector.
6. Remove two screws, and the Paper Feed Drive
Motor.
D-32