Table of Contents
Advertisement
3.11.1.3
Default parameter
Following default parameters are good to know for the initial MIC-6311 LAN setup:
IP-Address: 192.168.1.1
LAN Channel Number: 5
Username: "administrator"
Password: "advantech"
3.11.2
LAN Configuration with IPMItool
The open source IPMItool utility is used in this chapter for the MIC-6311 SOL and
LAN parameter configuration. Any other utility, based on standard IPMI commands,
can be used as well.
To get an overview of all possible commands within an IPMItool command group,
please use the single keywords (e.g. "lan", "user" or "sol") only.
3.11.2.1
LAN Commands
lan print [channel number]
Get the LAN configuration parameters for a given channel.
[root@localhost ~]# ipmitool lan print
Set in Progress
Auth Type Support
Auth Type Enable
IP Address Source
IP Address
Subnet Mask
MAC Address
Default Gateway IP
RMCP+ Cipher Suites
Cipher Suite Priv Max
lan set <channel> <command> [option]
This command can be used to change several BMC LAN parameters (e.g. IP
address, netmask, gateway IP address). Below example demonstrates how to
change the BMC IP address.
[root@localhost ~]# ipmitool lan set 5 ipaddr 172.21.35.104
Setting LAN IP Address to 172.21.35.104
3.11.2.2
User Commands
user list
: Set Complete
: NONE MD5 PASSWORD
: Callback : NONE MD5 PASSWORD
: User
: NONE MD5 PASSWORD
: Operator : NONE MD5 PASSWORD
: Admin
: NONE MD5 PASSWORD
: OEM
:
: Static Address
: 192.168.1.1
: 255.255.255.0
: 00:0b:ab:3e:45:87
: 0.0.0.0
: 0,1,2,3,6,7,8,11,12
: aaaaaaaaaXXXXXX
:
X=Cipher Suite Unused
:
c=CALLBACK
:
u=USER
:
o=OPERATOR
:
a=ADMIN
:
O=OEM
55
MIC-6311 User Manual
Advertisement
Table of Contents
