Server Management - Advantech MIC-6311 User Manual

2.3.6

Server Management

 BMC Self Test Status
Use this information to resolve BMC self-test errors by referencing the error
codes and following the suggested corrective actions.
 BMC Support
 Wait for BMC
Allows users to set the number of seconds to wait for BMC. Use the <+> and <-
> keys to adjust the value.
 FRB-2 Timer
The FRB-2 timer is started during POST and used to recover the system if nec-
essary.
 FRB-2 Timer Time-out
Enter a value between 3 to 6 minutes to set the FRB timer expiration value.
 FRB-2 Timer Policy
Allows users to configure the system response should the FRB-2 timer expire.
Not available if the FRB-2 timer is disabled.
 OS Watchdog Timer
If enabled, this item starts a BIOS timer that can only be deactivated using Intel
Management Software after the OS loads. This indicates whether the OS has
successfully loaded or follows the O/S Boot Watchdog Timer Policy.
 OS Watchdog Timer Time-out
Allows users to configure the length of the O/S Boot Watchdog Timer. Not avail-
able if the O/S Boot Watchdog Timer is disabled.
 OS Watchdog Timer Policy
Allows users to configure the system response should the OS Boot Watchdog
Timer expire. Not available if the O/S Boot Watchdog Timer is disabled.
Figure 2.19 Server management
35 MIC-6311 User Manual