Step 1a: Installing the easy install assembly (without escutcheon)
Step 1b: Installing the easy install assembly (with escutcheon)
6
a
b
a
b
C
Shut off the water supply. Remove the
old faucet. Clean the mounting surface.
Check for the proper thickness of the
sink or countertop. Insert the base (a)
into the sink or countertop. If your
model does have a escutcheon, skip to
step 1 b.
NOTE: "Front" on the base (a) must
face the front of the sink or
countertop. The two mounting plates
(b) b) on the base (a) must be loose
movable during the installation of
the base (a).
Place the escutcheon (C) and the gasket
(D) D) on the s
C
base (a) into the escutcheon (C). Note:
If the surface is uneven, use silicone
D
under the gasket (D).
NOTE: "Front" on the base (a) must
face the front of the sink or
countertop. The two mounting plates
(b) b) on the base (a) must be loose
movable during the installation of
the base (a).
or countertop. Insert the