Prior To Installation; Tools Required; Care And Maintenance - Kraus Oletto KPF-2631 Installation Manual

Single handle commercial style kitchen faucet

Hide thumbs Also See for Oletto KPF-2631:

Table of Contents

STOP

Prior to Installation:

Make sure you have all necessary parts by checking the diagram and

parts list. If any part is missing or damaged, please contact Kraus

Customer Service at 800-775-0703 for a replacement.

Read all instructions and safety warnings and ensure you have all tools,

parts, and equipment necessary for a safe installation.

Turn off the hot and cold water supply at the angle stops and turn on

the old faucet to release any built up pressure. Remove existing faucet.

Pre-drilled hole size requirement: 1 3/8" (min)

Max countertop thickness: 2 3/8"

For technical assistance or replacement parts, please contact Kraus Customer

Service and one of our representatives will be happy to help:

Toll-Free: 800-775-0703 or Customerservice@kraususa.com

Wrench

Care & Maintenance

To keep the product clean & shining, follow the steps below:

Rinse with clean water & dry with a soft cloth

Do not clean with soaps, acid, polish, abrasives or harsh cleaners

Do not use cloth with a coarse surface

Unscrew the aerator and clean when necessary

This installation manual is subject to change without further notice.

Phillips Screwdriver

Silicone Sealant

Pipe Tape

Safety Goggles

ACID

Table of Contents