Sun Microsystems Ultra 80 Installation Manual page 12

Hide thumbs Also See for Ultra 80:

2. Fasten the rails to the rack (

Caution – If you are installing multiple systems, install the lower rack-mount kits

(and system) first, then work toward the top. This prevents the rack from being top-

heavy and tipping.

a. Mark one rack hole on each rack column to ensure horizontal spacing for the

rails and tray.

Typical racks are numbered in increments of 5 rack holes. Use these markers to

align your rails.

b. Using four of the provided screws, fasten the left rail assembly to the left side

of the rack.

c. Align the right side rail assembly with the left side rail.

d. Using four of the provided screws, fasten the right rail assembly to the right

side of the rack.

FIGURE 5

Sun Ultra 80 Rack Mount Installation Guide • May 1999

FIGURE 5

Installing Rails into the Rack

Table of Contents