Sun Microsystems Ultra 80 Installation Manual page 14

4. Fasten the mounting tray to the mounting rails.
a. Using two of the provided screws, fasten the rear of the tray to the rails.
Feed the screws through the flanges from the rear side of the flange. This helps to
align the fastening holes in the front flanges.
b. Using two of the provided screws, fasten the front of the tray to the rails.
The screws should be fed through the tray flange into the rail flange from the top.
FIGURE 7
14 Sun Ultra 80 Rack Mount Installation Guide • May 1999
Fastening the Mounting Tray to the Mounting Rails