Advertisement
Available languages
Available languages
RELEASE OF LIABILITY:
By assembling and inflating this product, you agree that you have read and understand the entire World of
Watersports' product manual, including all instructions and warnings contained in that material prior to using this
product. You additionally agree that you will ensure any additional or subsequent users of this product will read
and understand the entire owner's manual. Misuse or improper use of this product could result in risks, dangers
and hazards which can result in serious injury or death. The risks and dangers that can be encountered through
the improper use of this product can be avoided by reading and following the warning guidelines listed within the
owner's manual and by proper use of this product. Your assembly and use of this product shall be evidence of your
agreement, to the fullest extent permitted by law, to properly follow the instructions and abide by the warnings set
forth within the product manual. Your assembly and use of this product shall also constitute a release, to the extent
permitted by law, by you and by any third party permitted by you to use, in any manner, this product, to World of
Watersports from any and all liability for any loss, damage, injury and/or expense that you or any user of this
product may suffer as a result of the use of this product. This release shall extend to any loss, damage, injury
or expense due to any cause whatsoever, including negligence or breach of contract on the part of World of
Watersports and/or any party participating in the design and/or manufacture of this product. The terms of this
release shall be effective and binding upon you, your heirs, next of kin, executors, administrators, assigns and
representatives. Your assembly and use of this product shall constitute your agreement to assume and accept
any or all known or unknown risks of injury to you and/or to third parties through the use of this product. World of
Watersports and related parties have not made and hereby expressly deny any oral or written representation and/
or warranty, including warranty for a particular purpose, other than what is set forth herein and in the World of
Watersports' owner's manual.
This WOW Product Manual applies to the following items listed below please read and follow all warnings
and information that applies to your specific WOW Product :
Product Name
Model#
Approximate Inflated Size
Yankee Coupe 13-1070 76 x 74 inch 193 x 187 cm
Big Bubba
13-1081 65 x 64 inch 165 x 162 cm 1-2
Super Bubba
13-1092 75 x 73 inch 190 x 185 cm 1-3
Giant Bubba
13-1101
89 x 80 inch 226 x 203 cm
Thriller
11-1060
50 x 48 inch 127 x 121 cm
Big Thriller
11-1070
60 x 56 inch 152 x 142 cm
Super Thriller
11-1080 75 x 62 inch 190 x 157 cm
Giant Thriller
11-1090 90 x 66 inch 228 x 167 cm
Ace Racing
15-1120
50 x 48 inch 127 x 122 cm
Big Boy Racing
15-1130
69 x 69 inch 175 x 175 cm
Buzz Boat
14-1040
62 x 56 inch 157 x 142 cm 1
Bronco Boat
14-1050
94x60 inch 239x152 cm 1-2
Dragon Boat
13-1060
121 x 62 x 22 inch 307x157x55 cm 1-3
XO Xtreme
12-1030
84x70x64 inch 213x177x162 cm 1-3
Bingo 2
14-1060
69x68 inch 175x172 cm 1-4
Bingo 3
14-1070
86x75 inch 218x191 cm 1-3
Bingo 4
14-1080 108x73 inch 274x185 cm 1-4
Lugz 2
13-1040
76x65 inch 193x165 cm 1-2
Bucket Seat
14-1090
54x44 inch 137x112 cm 1
Riders
Approximate
Weight Limit
1-2
340 Ibs. 154 kg.
340 Ibs. 154 kg.
510 Ibs. 231 kg.
1-4
680 Ibs. 308 kg.
1
170 Ibs. 77 kg.
1-2
340 Ibs. 154 kg.
1-3
510 Ibs. 231 kg.
1-4
680 Ibs. 308 kg.
1
170 Ibs. 77 kg.
1-4
680 Ibs. 308 kg.
170 Ibs. 77 kg.
340 Ibs. 154 kg.
510 Ibs. 231 kg.
510 Ibs. 231 kg.
340 Ibs. 154 kg.
510 Ibs. 231 kg.
680 Ibs. 308 kg.
340 Ibs. 154 kg.
170 Ibs. 77 kg.
2
THE BEST AIR PUMPS TO USE TO INFLATE YOUR TUBE ARE THE FOLLOWING:
1. 110 Volt Electric Pump - E.g. WOW 2.0 to 3.0 PSI High Pressure Air Pump
or any 110 Volt Electric Pump with 2.0 to 3.0 PSI
2. WOW Double Action Hand Pump or Foot Pump specifically designed for towables
3. 12 Volt Pump pumps can also be used but their maximum output is only .8 psi so a secondary pump such a
hand pump or foot pump will need to be used.
4. Leaf Blower
5. Shop Vac or vacuum with two-way switch
6. Do NOT use an air compressor.
1.
2.
ASSEMBLY INSTRUCTIONS:
1. Lay the product out on a flat surface without sharp objects that could puncture the PVC bladder or cover.
If the product has an outer cover make sure the inside PVC bladder is unfolded and the valves are in the correct
position, aligned with the cover valve openings.
2. Inflate the product to about 50% full. If your product has a cover, re-check to make sure it is correctly
aligned with the PVC bladder and valves. If there is more than one chamber in the bladder, inflate the
outer chamber first. After the cover is aligned with the PVC bladder, inflate the chambers to 100% starting
with the outer chamber.
3. Close and secure all valves completely. (If your product has zipper valve covers close
all valves and zip all zippers)
4. If your WOW product has a zippered cooler lid or lids after inflation is completed properly make sure the
zippered cooler lids are zipped
shut.
PROPER INFLATION:
Proper inflation is the key to optimum performance and durability of this product. While in use, the cover should be
taught with few wrinkles. Once inflated you should test whether there is enough air in the tube by having an adult
stand on top of the tube. If the tube is properly inflated, then the adult will barely sink into the tube while standing
on top of it. If the tube is under inflated damage can occur to the tube while it is being towed and the warranty will
be voided. It is important to monitor the amount of air in the product once the item is in use. Continue to make sure
that the tube is properly inflated. When not in use, be sure to remove some air from the tube and put in a shaded
area. If you leave a full tube sitting in the sun it will cause the air inside to expand, causing serious damage to the
seams and I-beams of the tube. Check and adjust inflation levels each time you use the tube.
MAINTENANCE:
• You may clean your towable using soap and water or mild detergent.
• Never use strong cleaning agents.
• The towable, when clean and dry, can be deflated and stored in a cool, dry area out of direct sunlight.
• To deflate, simply unfasten the entire valve from the base.
• Avoid storing this product in areas of extreme temperatures and please take precautions against animals
and rodents.
• Bright colored fabric covers used on the towable may bleed or fade when initially wet. Protect all boat interiors
and all other surfaces from possible staining.
PRODUCT STORAGE:
To prepare the product for storage please make sure that it is completely dry to prevent mildew and rot. If the
product was used in salt water make sure to rinse the item first with fresh water and then allow it to dry completely.
Release all of the air from the chamber(s) and fold the product. If possible please store these products in a
controlled temperature and do not expose the product to temperatures less than 40 degrees F. Cold temperature
will damage the PVC material and cause it to crack at the folds.
2.
3.
3
Advertisement
