Release Of Liability - Wow Matrix 20 Owner's Manual

RELEASE OF LIABILITY:

By assembling and inflating this product, you agree that you have read and understand the entire World of
Watersports' product manual, including all instructions and warnings contained in that material prior to using this
product. You additionally agree that you will ensure any additional or subsequent users of this product will read
and understand the entire owner's manual. Misuse or improper use of this product could result in risks, dangers
and hazards which can result in serious injury or death. The risks and dangers that can be encountered through
the improper use of this product can be avoided by reading and following the warning guidelines listed within the
owner's manual and by proper use of this product. Your assembly and use of this product shall be evidence of your
agreement, to the fullest extent permitted by law, to properly follow the instructions and abide by the warnings set
forth within the product manual. Your assembly and use of this product shall also constitute a release, to the extent
permitted by law, by you and by any third party permitted by you to use, in any manner, this product, to World of
Watersports from any and all liability for any loss, damage, injury and/or expense that you or any user of this
product may suffer as a result of the use of this product. This release shall extend to any loss, damage, injury
or expense due to any cause whatsoever, including negligence or breach of contract on the part of World of
Watersports and/or any party participating in the design and/or manufacture of this product. The terms of this
release shall be effective and binding upon you, your heirs, next of kin, executors, administrators, assigns and
representatives. Your assembly and use of this product shall constitute your agreement to assume and accept
any or all known or unknown risks of injury to you and/or to third parties through the use of this product. World of
Watersports and related parties have not made and hereby expressly deny any oral or written representation and/
or warranty, including warranty for a particular purpose, other than what is set forth herein and in the World of
Watersports' owner's manual.
This WOW Product Manual applies to the following items listed below please read and follow all warnings
and information that applies to your specific WOW Product :
Product Name Model# Approximate Inflated Size
Matrix 20-1060 91 in x 66 in x 32 in 1-4 680 Ibs. 308 kg.
231 cm x 167 cm x 81 cm
Package Contents: 2 Heavy-Gauge PVC Bladder, 1 Full Nylon Cover with Zippers, 1 Product Manual, 1 Patch Kit
Speed Zilla 20-1000 52 in x 78 in x 15 in 1-2 340 Ibs. 154 kg.
132 cm x 198 cm x 38 cm
Package Contents: 1 Heavy-Gauge PVC Bladder, 1 Partial Nylon Cover, 1 Product Manual, 1 Patch Kit
Riders Approximate Weight Limit
2
THE BEST AIR PUMPS TO USE TO INFLATE YOUR TUBE ARE THE FOLLOWING:
1. 110V Electric Pump - E.g. WOW Sports 2.6 PSI High Pressure Air Pump
or any 110V Electric Pump with 2.5 to 3.0 PSI
2. WOW Sports Double Action Hand Pump or Foot Pump
3. WOW Sports 12V Pump - Note that most 12V pumps have a maximum air pressure of 1.0 PSI so a secondary
air pump, such as the Double Action Hand Pump or a foot pump, will need to be used to reach the necessary
air pressure for your inflatable.
4. Leaf Blower
5. Vacuum with two-way switch
1. 2.
ASSEMBLY INSTRUCTIONS:
1. Lay the product out on a flat surface without sharp objects that could puncture the PVC bladder or cover. The
product has an outer cover so make sure the inside PVC bladder is unfolded and the valves are in the correct
position, aligned with the cover valve openings.
2. Inflate the product to about 50% full. Your product has a cover so re-check to make sure it is correctly
aligned with the PVC bladder and valves. If there is more than one chamber in the bladder, inflate the outer
chamber first. After the cover is aligned with the PVC bladder, inflate the chambers to 100% starting with the
outer chamber.
3. Inflate the bladders until it is firm and the cover is wrinkle free and taut.
(Please see the PROPER INFLATION section below for proper inflation instruction).
4. After your product is inflated properly close all valves completely. Zip close valve covers.
SPEED ZILLA front tow point
valve location
2. 3.
MATRIX
valve locations
front tow point
3