Release Of Liability - Wow 22-WIL-4075 Owner's Manual

Circle water walkway
Table of Contents

Advertisement

Available languages

Available languages

RELEASE OF LIABILITY:

By assembling and inflating this product, you agree that you have read and understand the entire
World of Watersports' product manual, including all instructions and warnings contained in that material prior to
using this product. You additionally agree that you will ensure any additional or subsequent users of this product
will read and understand the entire owner's manual. Misuse or improper use of this product could result in risks,
dangers and hazards which can result in serious injury or death. The risks and dangers that can be encountered
through the improper use of this product can be avoided by reading and following the warning guidelines listed
within the owner's manual and by proper use of this product. Your assembly and use of this product shall be
evidence of your agreement, to the fullest extent permitted by law, to properly follow the instructions and abide
by the warnings set forth within the product manual. Your assembly and use of this product shall also constitute
a release, to the extent permitted by law, by you and by any third party permitted by you to use, in any manner,
this product, to World of Watersports from any and all liability for any loss, damage, injury and/or expense that you
or any user of this product may suffer as a result of the use of this product. This release shall extend to any loss,
damage, injury or expense due to any cause whatsoever, including negligence or breach of contract on the part of
World of Watersports and/or any party participating in the design and/or manufacture of this product. The terms of
this release shall be effective and binding upon you, your heirs, next of kin, executors, administrators, assigns and
representatives. Your assembly and use of this product shall constitute your agreement to assume and accept
any or all known or unknown risks of injury to you and/or to third parties through the use of this product.
World of Watersports and related parties have not made and hereby expressly deny any oral or written
representation and/or warranty, including warranty for a particular purpose, other than what is set forth
herein and in the World of Watersports' owner's manual.
This WOW Product Manual applies to the following item listed below please read and follow
all warnings and information:
Product Name
Model#
Circle Water Walkway
22-WIL-4075 20 FT (6 M)
Package Contents: 4 Heavy-Gauge PVC Bladders, 1 Rope, 1 Repair Patch, 1 Product Manual
Patented
THE BEST AIR PUMPS TO USE TO INFLATE YOUR TUBE ARE THE FOLLOWING:
1. 110 Volt Electric Pump - E.g. WOW 2.0 to 3.0 PSI High Pressure Air Pump
or any 110 Volt Electric Pump with 2.0 to 3.0 PSI
2. WOW Double Action Hand Pump or Foot Pump specifically designed for towables
3. 12 Volt Pump pumps can also be used but their maximum output is only .8 psi so a secondary pump such a
hand pump or foot pump will need to be used.
4. Leaf Blower
5. Shop Vac or vacuum with two-way switch
6. Do NOT use an air compressor.
1.
2.
Note the 12-2030, 12-2040, 12-2050, 12-2060, Water Walkway has a PATENT PENDING extend and zip
connection system you can take advantage of when you BUY 2 OR MORE 12-2030, 12-2040, 12-2050, 12-2060 Water
Walkway you can turn this into a 6 x 20ft., 6 x 40ft., 6 x 60ft... (SEE DIAGRAM PICTURE) The 12-2030, 12-2040,
12-2050, 12-2060, Water Walkway is ideal for creating a walkway between boats or for just making a huge island for a
large group of people to float and party on. When you buy both products 12-2030, 12-2040, 12-2050, 12-2060 Water
Walkway and 14-2080 Water Walkway Mat you can combine both products to build a custom island or walkway.
Approximate
Person
Inflated Size
16
3.
4.
2
ASSEMBLY INSTRUCTIONS:
1. Lay the product out on a flat surface without sharp objects that could puncture the PVC bladder.v
2. Locate the valve on the main tube and begin inflating. Inflate the product to 100% full.
3. Inflate the main chamber until it is firm. Once inflated you should test whether there is enough air in the product
by having an adult stand on top of the product. If the product is properly inflated, then the adult will barely sink
into the product while standing on top of it. (Please see the PROPER INFLATION section listed in this manual
for proper inflation instructions).
4. Close valve completely.
5. Tie and prepare the two 6 foot sections of rope that come with your product properly to your desired
anchor point such as a dock or non running boat. (NOTE THIS ITEM IS NOT A TOWABLE DO NOT TOW)
Note the 14-2080 Water Walkway Mat has a PATENT PENDING zipper connection system on all 4 sides you
can take advantage of when you BUY 2 OR MORE 14-2080 Water Walkway Mat you can turn this into a long
walkway or large floating island in different configurations with zippers on all 4 sides. (SEE DIAGRAM PICTURE)
ZIPPER CONNECTION SYSTEM
ZIPPER CONNECTION SYSTEM
Approximate
Weight Limit
1020 lbs per mat
462 kg per mat
WHEN YOU BUY 2 OR MORE WATER WALKWAYS UTILIZE THE PATENT PENDING EXTEND AND ZIP CONNECTION SYSTEM!
WHEN YOU BUY 2 OR MORE WATER WALKWAYS UTILIZE THE PATENT PENDING EXTEND AND ZIP CONNECTION SYSTEM!
PROPER INFLATION:
Proper inflation is the key to optimum performance and durability of this product. While in use, the PVC bladder
should be firm. Your product is constructed out of PVC material only inflate until firm. Once inflated you should
test whether there is enough air in the product by having an adult kneel on the product. If the product is properly
inflated, then the adult will barely sink into the product while kneeling on it. If the product is under inflated damage
can occur to the product while in use and the warranty will be voided. It is important to monitor the amount of air
in the product once the item is in use. Continue to make sure that the product is properly inflated. When not in use,
be sure to remove some air from the product and put in a shaded area. If you leave a full product sitting in the sun
it will cause the air inside to expand, causing serious damage to the seams and I-beams of the product. Check and
adjust inflation levels each time you use the product.
3

Advertisement

Table of Contents
loading

Table of Contents