Table of Contents
Advertisement
5.1.9
Stray welding currents
Risk of injury due to stray welding currents!
Stray welding currents can destroy protective earth conductors, damage machines and
electronic devices and cause overheating of components, leading to fire.
•
Check that all welding current connections are firmly secured and electrical connections are
in perfect condition.
•
Set up, attach or suspend all conductive power source components such as casing, trans-
port vehicles and crane frames so they are insulated.
•
Do not place any other electronic devices such as drills or angle grinders on the power
source, transport vehicle or crane frames unless they are insulated.
•
Always put welding torches and electrode holders on an insulated surface when they are
not in use.
099-005589-EW501
9.02.2023
Design and function
WARNING
Figure 5-9
Transport and installation
25
Advertisement
Table of Contents
Need help?
Do you have a question about the Taurus 355-505 Basic S and is the answer not in the manual?
Questions and answers