Door Panel Installation - Fisher & Paykel RS6121S Installation Manual

Tools Hanging the door panel
Cross-head
screwdriver
M4 hex key (1x)
1/2" (13mm) spanner
1
(1x)
1/2" (13mm) socket
wrench
2
42

DOOR PANEL INSTALLATION

Hold the door panel at an angle from
the top of the door and lower the screw
holes of the hanging bracket onto the
adjustment screws. .
Align the door panel straight with the
door and slide-in the side brackets to the
side screws of the door,
Tighten the side screws loosely to
temporarily secure the door panel.
3
For Refrigerator-Freezer
Repeat steps 1 - 3 for the top door and
drawer panels.
Use a 1/2" (13mm) socket wrench to
tighten or loosen the M8 nut in the drawer
panel.
Illustrations may differ from your purchased appliance.
Screw the M8 washer and nut to the
adjustment screw and loosely tighten.