Robe iSpiider User Manual page 10

Note for open-air installation: if the fixture stands on the ground, min. distance of 4" (10cm) between the fixture
base and the ground has to be kept.
Before taking into operation for the first time,the installation has to be approved by
In order to protect the internal parts of the head from the sun, the function
PARKING POSITION must be switched ON before switching the fixture off.
The PARKING POSITION function is located on the Power/Special functions channel (120-129 DMX). If the
function is on, the fixture will automatically detect via G-sensor whether the fixture is on the floor or hangs on
the truss or is mounted sideways on the truss and moves the pan and tilt to the position (including movement
of zoom to the front part of the head) in which the head will always face down. Owing this position of the fixture
head, there is not chance to burn internal parts of the head by the sun light.
When installing fixtures side-by-side,
avoid illuminating one fixture with another!
DANGER TO LIFE!
an expert!
10