Table of Contents
Advertisement
User's Manual (Confidential)
OsteoSys Co., Ltd.
Model Designation : SONOST-2000
4
Maintenance and Repair of SONOST-2000
4.1 Resolution to problems
If SONOST-2000 shows following symptoms, check the system as follows.
Problems
SONOST-2000 is not activated
with the power on.
Computer is not activated with
the power on.
Result of Daily Test of the
system
turns
abnormal.
Result
of
turns out to be abnormal
Despite measurement
according
instructions, its result turns
out to be abnormal
The balloons tears easily
CAUTION !
If you cannot resolve the problem, contact to OsteoSys or your local authorized
dealer.
Is the device properly plugged?
Isn't the power cord damaged?
Aren't the fuses gone?
Is the device properly plugged?
Isn't the power cord damaged?
out
to
be
measurement
Is the desired part of the body properly
placed?
Are the balloons adjusted properly?
to
the
Are there bubbles in the balloon?
Is the hardened gel stuck on the surface
of the balloons
Is there any material on the surface of QC
phantom?
DOC. No. : OT01-2R7123
Checking points
3.2.2.8 Daily Test of SONOST-2000
3.2.2.5 BQI Measurement
3.2.2.8 Daily Test of SONOST-2000
4.2.1 Cleaning
78
Advertisement
Table of Contents
