User's Manual (Confidential)
OsteoSys Co., Ltd.
Model Designation : SONOST-2000
4.2.2
Stock pile and replacement of articles
Make sure to keep following articles of consumption all the time.
2.1.5 Articles List
Articles
Purchase ones at our authorized dealer when it needs to be used.
1. Remove the hardened gel from the probe.
2. Clean the surface of the probe with an alcohol pad.
3. After attaching the balloon to the probe holder, Adjust the
Balloon
4. After filling water into the balloon, close it with the stopper.
5. Check the surface of the probe through the balloon. Tap the
< Replacement procedure of the balloon >
balloon housing to the probe holder.
balloon to remove bubbles inside of the balloon.
DOC. No. : OT01-2R7123
Specifications
80