Table of Contents
Advertisement
User's Manual (Confidential)
OsteoSys Co., Ltd.
Model Designation : SONOST-2000
-
This device is an ultrasound bone densitometer which has ±0.2(T-score) precision
error.
-
The equipment must be operated only by, or under supervision of a qualified
person.
-
When you give appropriate commands in SONOST-2000 software, ultrasonic
waves are generated. The generated ultrasonic waves pass through the patient's
calcaneus and the electric signals are treated by SONOST-2000 algorithm.
-
SONOST-2000 measures speed of sound(SOS) and the frequency-dependent
attenuation of the sound waves(BUA), and combines them to form a clinical
measure called Bone Quality Index(BQI)
-
All operators must understand the potential hazards in the use of medical
electronic devices. They must be able to recognize hazards and protect
themselves and others from injury.
-
The system should be placed at least 20cm from any wall. However the USB
cable length should not be longer than 3.0m.
-
Never remove any system covers.
-
In case of changing the PC or the printer for other products, check them according
to IEC/EN60601-1-1.
Unplug the power cord before you move or clean the device and after using
-
SONOST-2000
For installation and operation of this equipment, national regulations shall be
-
considered.
※ Features and Cautions !
DOC. No. : OT01-2R7123
16
Advertisement
Table of Contents
