Table of Contents
Advertisement
User's Manual (Confidential)
OsteoSys Co., Ltd.
Model Designation : SONOST-2000
NOTE !
Use accessories which are defined in the user's manual.
Check the following accessories before installing the system
2.1.3
Accessories list
Check the following accessories before installing the system.
If they are not in good condition, contact OsteoSys or local authorized
dealer for service.
Names of Products
User's Manual
Foot Positioner
QC Phantom
Injector
Guide
USB Cable
Power Cable
Program CD
Number
Make sure to keep it at a designated place so
1
that users can read it anytime they need to.
3
Use them in accordance with patients' foot size.
It is used to calibrate the system.
1
Keep it in the specified place and protect
it
pressure.
1
It helps to take water into the balloon easily.
5
It helps to take water into the balloon easily.
It is used to connect the computer to the main
1
body of SONOST-2000.
It is used to connect to the source of electric
power with the main body of SONOST-2000
Make sure to connect it with a grounded
1
electric outlet.
If you want to change a power cord, then
you must use a power cord stronger than
Appendix A of KS C IEC60227-1:2007.
It is used to install the software program on the
1
computer.(The program is factory installed on
the computer before being delivered).
19
DOC. No. : OT01-2R7123
Uses
against
deformation
by
heat
or
Advertisement
Table of Contents
