Maintenance And Repair; Cleaning, Disinfection, Sterilization - OsteoSys SONOST 3000 User Manual

User's Manual (Confidential)
OsteoSys Co., Ltd.
Model Designation: SONOST 3000

4.2 Maintenance and Repair

4.2.1 Cleaning, Disinfection, Sterilization.

CAUTION !
Turn off the power before cleaning the device.
Product
After using the device, wash with Alcohol swap.
The device should be cleaned with clean soft cloth wrung a water
everyday, because gel remains around the probe or below the
device. Especially, gel stained on the probe should be removed.
After this procedure, clean the stained area with a dry piece of
cloth.
Probe endurance condition
Device
Temperature range : -40℃~70℃
Humidity 0~90%
Atmospheric pressure : 50~106kPa
External force 0~1N
OT06-2R0423-06
DOC. No. : OT06-2R0423-06-MUL
Instructions
Make sure not to put water or detergent on the
device directly because it can cause fatal damage in
the electric circuit contained inside.
８１ A4(210 × 297)