Table of Contents
Advertisement
User's Manual (Confidential)
OsteoSys Co., Ltd.
Model Designation : SONOST-2000
Do not cover ventilation of the system or
place it near or against a wall. If the
temperatures of the inside of the system rise
too high, it can be a cause of the fire.
2.3 Before Turning on Power
(1) Connection of power &USB Cable (with the device)
(2) Connection of power cable (with the oulet)
100-240V is usable. When SONOST-
2000 is taken out of a warehouse,
insulating transformers should be set to
100-240V. Since sudden power outage
can remove all data
saved in the system,
you should install
SONOST-2000 at a
place where power
supply is stable.
Plug in the cable.
Plug into the connector.
When you disconnect the any
cable from the main body of
SONOST-2000, do not hold the
cable, instead hold the connector.
Otherwise the cable can break.
CAUTION !
(3)
Adjust the balloons in the device
Replacement of Articles
22
DOC. No. : OT01-2R7123
4.2.2
Stockpile
and
Advertisement
Table of Contents
