Replacing The Door Glass - Osburn OB04010K Installation And Operation Manual

5.1.6 Replacing the door glass

The glass used in the HORIZON is 4 mm thick of dimension 17.78" x 15.76" (45,16cm x 40,03cm) and tested
to reach temperatures up to 1400º F. If the glass breaks, it must be replaced with one having the same
specification. Contact your Osburn dealer to obtain a genuine replacement part (see "replacement parts",
in appendix to get the proper part number).
• TEMPERED GLASS OR ORDINARY GLASS WILL NOT WITHSTAND THE HIGH TEMPERATURES OF THE
HORIZON.
• DO NOT ABUSE THE GLASS DOOR BY SLAMMING IT AGAINST THR FIREPLACE.
• DO NOT OPERATE THE FIREPLACE WITH A CRACKED OR BROKEN GLASS.
In order to replace the glass, use the following procedure;
1- Remove the gasket (E) placed around the door frame (G) and its adhesive.
2- Remove the12 glass retainers (C) held in place by 12 screws (B).
3- Remove the glass (F) and/or debris from the frame
4- Install the new window into the frame (G) and fasten it in place with the glass retainers (C) and the
screws (B) removed earlier.
5- Handle the glass with care to avoid injury.
28
WARNING
HORIZON – Installation and Operation Manual