Volvo VN Service Manual page 25

Group 18 Rustproofing
12
The panel is now held in place by the
"christmas tree" fasteners. Carefully
pry the door panel away from the door.
13
Lift the upholstery away from the door.
Disconnect the electrical connectors
for the electrical equipment in the door
panel. Remove the door panel.
14
Note the position of wiring that may be
taped to the cover plate. Remove tape
to free the wiring. To aid in reassem-
bly, note the position of any missing
cover plate screws that were removed
during door upholstery removal. Re-
move the cover plate screws and then
remove the cover plate.
15
Coat the lower door cavity with cavity
wax up to 50 mm (2 in.) from the
bottom. With the application wand in-
serted in the door cavity, move the
wand as necessary to ensure com-
plete coverage.
16
Install the cover plate. Do not allow
any wiring to be pinched between
W8001382
plate and door. Leave the proper
screw holes empty for the door uphol-
stery installation. See step 14. Tape
wiring to the cover plate as necessary.
Torx 25
Torx 25
Service Procedures
W1000105
Cavity wax
spray kit
Torx 25
23