Group 18 Rustproofing
16
Lift the door upholstery into place.
Connect all electrical connectors. In-
stall the door upholstery and secure
with the "christmas tree" fasteners.
17
Install the 3 bolts and 3 screws that
secure the upholstery panel. Install the
cover plugs.
18
If equipped, install the window regula-
tor handle.
19
W8001382
Install the door handle knob. Install the
rubber plug.
20
Repeat all steps on the opposite side
of the truck. Clean off any drips or
overspray with mineral spirit.
W8001380
Note: To prevent the wax drying in the
14 mm socket
equipment, always thoroughly clean
Torx 25
the cavity wax spray kit with mineral
spirit after each use.
Service Procedures
W8001379
Torx 25
W8001398
Torx 10
19