Volvo VN Service Manual page 19

Group 18 Rustproofing
6
Remove the side repeater lamp lens
and base. Coat the cavity behind the
lamp. Move the wand as necessary to
ensure complete coverage, both on
the bottom and the panel side. Install
the repeater lamp.
7
Remove the knob on the door by
pulling the rubber plug out with a
scriber. Remove the screw.
8
If the vehicle is equipped with me-
W1000104
Philips,
chanical window regulators, remove
Torx 25,
the crank. Lift the vinyl cover in the
Cavity wax
wide end and push it to the side. Re-
spray kit
move the screw.
9
W8001398
Torx 10 Using a small, flatblade screwdriver,
carefully remove the six plugs in the
door panel.
Service Procedures
W8001379
Torx 25
W8001380
17