Ports; Port Settings - Moxa Technologies AWK Series User Manual

NOTE
Only management accounts with "Network" authority can manually remove or unlock devices blocked via
Automatic Wi-Fi ACL.
When finished, click APPLY.
Static Wi-Fi ACL
Static Wi-Fi ACL allows users to manually add devices to the list by MAC address and set the access policy
for all entries, either to allow or reject connections from the devices in the list.
Static Wi-Fi ACL Status
Setting
Enabled/Disabled
Static Wi-Fi ACL List Mode
Setting
Block/Accept
When finished, click APPLY.

Ports

From the Ports section, you can configure Port Settings.

Port Settings

The Ports Settings page is used to configure the physical LAN 1 and LAN 2 network ports on the device.
Click Port Settings under Ports in the function tree to access this screen.
AWK Series User Manual
Description
Enable or disable Static Wi-Fi ACL.
Description
Choose to either block or accept connections from the MAC
addresses in the Static Wi-Fi ACL table.
Factory Default
Disabled
Factory Default
Empty
80