Package Checklist; Installation And Configuration - Moxa Technologies AirWorks AWK-5232 Quick Installation Manual

Overview
The AWK-5232 802.11 a/b/g/n dual-RF wireless AP/Bridge/Client
provides a flexible and highly reliable solution for your industrial wireless
networks.
The AWK-5232 is rated to operate at temperatures ranging from 0 to
60°C for standard models and -40 to 75°C for extended temperature
models, and it is rugged enough for industrial applications.
With two independent RF modules, the AWK-5232 supports a greater
variety of wireless configurations and applications, and the redundant
wireless connections increase the reliability of your entire wireless
network.
The AWK-5232's two DC power inputs make the power supply more
reliable, and it can also be powered via PoE for easier deployment.

Package Checklist

Moxa's AWK-5232 is shipped with the following items. If any of these
items is missing or damaged, please contact your customer service
representative for assistance.
• 1 AWK-5232
• 4 Swivel-type Antennas (2dBi, RP-SMA, 2.4&5GHz)
• 1 Quick Installation Guide
• 1 Software CD
• 1 Moxa Product Warranty Booklet
• 1 Cable Holder with a Screw
• 2 Protective Caps

Installation and Configuration

Before installing the AWK-5232, make sure that all items in the Package
Checklist are in the box. In addition, you will need access to a notebook
computer or PC equipped with an Ethernet port. The AWK-5232 has a
default IP address that you must use when connecting to the device for
the first time.
Step 1: Select the power source
The AWK-5232 can be powered by a DC power input or PoE+ (Power over
Ethernet). The AWK-5232 will use whichever power source you choose.
ATTENTION
Do not use IEEE802.3af PoE Injector or PSE (Power Sourcing
Equipment). Use IEEE802.3at-compliant PSE for PoE+ (Power
over Ethernet) device.
Step 2: Connect the AWK-5232 to a notebook or PC
Since the AWK-5232 supports MDI/MDI-X auto-sensing, you can use
either a straight-through cable or crossover cable to connect the
AWK-5232 to a computer. If the LED indicator on the AWK-5232's LAN
port lights up, it means the connection is established.
www.ipc2u.ru
- 2 -
www.moxa.pro