MAGNATRAC RT1150 Operator / Technical Manual page 60

• Transaxle Control linkage is bent, or out of
adjustment. > Repair or replace linkage,
see page 9 & 13 of transaxle manual.
• Transaxle bypass assembly sticking. > Re-
pair or replace bypass. See transaxle man-
ual, page 29.
• Brake partially engaged. > Disengage
brake, replace broken or missing brake re-
turn spring.
MAGNATRAC operates in one direction only.
• Transaxle control linkage bent or out of ad-
justment. > Repair or replace linkage, see
page 9 of transaxle manual.
• Drive belt slipping or pulley damaged. >
Repair or replace drive belt or pulley, page
9.
Transaxle is noisy
• Oil level low or contaminated. > FIll to
proper level or change oil. Page 11 of
Transaxle Manual.
• Excessive loading. > Reduce Vehicle Load-
ing. Page 9 of the transaxle manual.
• Loose parts. > Repair or replace loose
parts.
• Bypass assembly sticking. > Repair or re-
place linkage, page 9 of the transaxle man-
ual.
• Air trapped in hydraulic system. > Purge
hydraulic system, page 12 of the transaxle
manual.
• Brake partially engaged. > Disengage
brake, replace broken or missing brake re-
turn spring.
Transaxle is operating hot
• Debris built up around transaxle. > Clean
off debris. Page 20 of Transaxle Manual.
• Cooling fan damaged. Repair or replace
cooling fan, pages 22-24 of transaxle man-
ual.
• Oil level low or contaminated. > Fill to
proper level or change oil, page 11 of
transaxle manual.
• Excessive loading. > Reduce vehicle load-
ing, page 9 of the transaxle manual.
• Air trapped in hydraulic system. > Purge
hydraulic system, page 12 of the transaxle
manual.
• Brake partially engaged. > Disengage
brake, replace broken or missing brake re-
turn spring.
Transaxle leaks oil
• Damaged seals, housing or gaskets. > Re-
place damaged components.
• Air trapped in hydraulic system. > Purge
hydraulic system, page 12 of the transaxle
manual.
60