MAGNATRAC RT1150 Operator / Technical Manual page 39

Forward
Neutral
Reverse
Control A
Step 4: Your Bypass Arm should still be "Open" at
this time. See below.
Bypass Arm (Open)
Flapper
(Down)
Step 5: Lift "flapper" up and pull the "Rod" rear-
ward, allowing the "Rear Collar" to come through
the key hole slot in the "Bracket." It should now
look like the picture below.
Flapper
(Up)
Forward
Neutral
Reverse
Control B
Front Collar
Rear Collar
Step 6: Your bypass arm is now considered
"Closed." To make sure the bypass arm stays
"Closed", we advise to rotate the "Flapper" down-
ward at this time. See picture below.
Bypass Arm (Closed)
Rod
Front Collar
Rear Collar
Step 7: With the "bypass arms closed" from
your previous steps, "enagage" your MAGNA-
TRAC brake lever to start the engine. Start the
unit.
H - Brake Handle
Step 8: "Disengage" the MAGNATRAC brake
lever while the engine is still running. See below.
DISENGAGED
39
Bracket with
Key Hole
Opening
Flapper
Carriage Bolt
ENGAGED
Brake Lever