Table of Contents
Advertisement
Step 4: Loop a #1805A Chain around each set of
Rear Drive Sprockets and #4540 Sprocket Hub on
left & right sides of Body. See below.
Step 5: Join ends of each #1805A Chain with the
pins of each #1805B Connecting Link. Secure
each Link with Plate and lock with Clip.
4540
Clip
Rear
Plate
Drive
Link
Clip
Link faces
faces
inward
Plate
inward
Note: When installed, the pins of each master
connector link should point towards the center
of the machine. See above.
Step 6: To tension your new drive chains, skip to
Step 9 on the previous page.
48
Advertisement
Table of Contents
