MAGNATRAC RT1150 Operator / Technical Manual page 46

"Inner" Rear
Axle Plate
Left Rear View
4 Nuts
Right Rear View
Note: Use the 2 pictures at the top of the next
column as a reference. You will be working
back and forth between the "Outer" and
"Inner" adjustment bolts. Doing this assures
will not strip the threads of the adjustment
bolts.
4 Nuts
"Inner" Rear
Axle Plate
"Inner Welded" Nut
Bolt Adjustment
Plate
"Inner" Adjustment Bolt
"Outer" Adjustment Bolt
Front
Large
Axle
Washer
Step 4: Using a cordless impact driver or ratchet
with 3/4" socket and 3/4" wrench, loosen "Outer"
nuts on both sides of the machine approx. half
way down the threads. See above.
Step 5: Using a cordless impact driver or ratchet
with 3/4" socket and 3/4" wrench, now loosen the
"Inner Welded" Nuts on both sides of the ma-
chine, approx. half-way down the threads. See
above.
Step 6: Now work back to the outside of the ma-
chine. Using a cordless impact driver or ratchet
with 3/4" socket and 3/4" wrench, loosen "Outer"
nuts on both sides of the machine until they are
at the end of the threads, but still on the bolts. See
above.
Step 7: Now work back to the inside of the ma-
chine. Using a cordless impact driver or ratchet
with 3/4" socket and 3/4" wrench, loosen "Inner
Welded" nuts on both sides of the machine
until they are at the end of the threads, but still on
the bolts. See above.
46
"Inner Jamb" Nut
"Outer Jamb" Nut
"Outer"
Nut
Small
Washer