Heating Milk - Silvercrest SMAI 550 A1 Operating Instructions Manual

Heating milk

1) If not yet attached: Insert the spiral coil
stirrer
2) Remove the jug
reach MIN mark inside the jug
mark
Otherwise, the appliance may overflow.
NOTE
► If there is not enough milk in the appliance, all three red symbols
and
you will hear 9 beeps. Add milk. Observe the MIN mark!
NOTE
► To prepare hot chocolate, add the cocoa powder to the jug
right amount of cocoa powder varies depending on the brand and your
personal taste. Consult the instructions on the packaging of the cocoa
powder.
3) Place the jug
4) Put the lid
5) Press the On/Off / programme selection button
symbol
start rotating. This ensures that the milk is heated evenly.
6) The appliance switches off, the symbol
30 seconds and you will hear a beep as soon as the milk is hot.
NOTE
► If you wish to stop the preparation process before completion, press the
On/Off / programme selection button
process, press the On/Off / programme selection button
again until the
7) Take the lid off
Wait about 2 minutes before you heat up another portion of milk.
■ 26 │ GB │ IE
.
from the base
(500 ml).
will flash simultaneously shortly after you start the appliance and
on the base
on.
lights up. The appliance will heat up the milk and the whisk will
symbol
and pour the hot milk into the desired container.
into the slots of the whisk on the
and add milk. Add enough milk to
(130 ml). Never exceed the lower MAX
.
will flash for approximately
. To restart the preparation
lights up. The preparation process will restart.
,
now. The
3 times until the
3 times
SMAI 550 A1