Setting Up; Tips For Frothing Milk; Control Panel - Silvercrest SMAI 550 A1 Operating Instructions Manual

Setting up

1) Place the appliance on a dry and level surface. Ensure that the mains plug is
within easy reach.
2) Insert the plug into a mains power socket.

Tips for frothing milk

■ Froth only cow's milk with this appliance. Other types of milk can only be
frothed to a certain extent or may cause the appliance to overflow.
■ Low-fat milk might not froth as well. Therefore, use milk with a fat content of
3.5% or 1.5% when possible.
■ Well-cooled milk can be frothed better than warm milk.
■ Do not froth the milk a second time, otherwise it may burn.
■ Leave frothed milk to stand for about 30 seconds before you add the foam
to cappuccino, espresso, etc. This allows the larger bubbles to burst and the
still liquid milk sinks to the bottom. You can then use the fine foam.

Control panel

The control panel
Fig. 1
SMAI 550 A1
is made up of the following components:
: Programme for fluffy milk froth, red symbol
: Programme for dense milk froth, red symbol
: Programme for heating milk, red symbol
: Programme for cold milk froth, blue symbol
: On/Off button / programme selection
GB │ IE │ 23 ■