Advertisement
Assembly
Step 10: Attach the Side Burner Hous-
Step 10
Fig.10A
ing
Locate: Side Burner Housing, (6) M6x15 bolts
Procedure:
Refer to Fig. 10A, Screw in the (2) M6x15 bolts
into the top (2) holes in the left side legs of the
"
cabinet. BUT, leave about 1/8
of the bolt stick-
ing out, as shown.
Refer to Fig.10B, Position the Burner Housing
over the (2) bolt heads and into the (2) Keyhole
Fig.10B
openings. Slide the Housing down to fit the
bolts into the slots, and tighten the bolts to se-
cure the Housing to the Grill as seen in Fig.
10C. Now attach (2) M6x15 bolts into the (2)
bottom holes.
Refer to Fig.10D. Using another (2) M6x15
bolts, attach the Side Burner, from inside the
cabinet.
Fig.10C
Fig.10D
12
Advertisement
