Advertisement
Assembly
Step 21: Assemble Smoke Stack and
Step 21
Charcoal Grill Lid
Locate: Smoke Stack Assembly, Charcoal
Grill Lid, Smoke Stack Lid, (6) M6x15 bolts,
(4) M6 KEPS nuts, (1) small spring, (1) M6
Fig. 21A
Fig. 21B
Cap nut, (1) Heat Indicator, (1) Lid handle,
(4) M6X35 Bolts
Procedure:
Refer to Fig. 21A and 21B Insert the Smoke
Stack Assembly from INSIDE the Lid and fas-
ten it to the Lid with (4) M6x15 bolts and KEPS
nuts. NOTE: the bolts are inserted from the
OUTSIDE of the Lid.
Fig. 21D
Fig. 21C
Refer to Fig. 21C and Place the Smoke Stack
Lid onto the threaded stud , add the small
spring and then fasten with the Cap nut tight
enough that the Lid can be rotated to open and
close the Smoke Stack.
Refer to Fig 21D and unscrew the nut from the
stem of the Heat Indicator and follow the same
procedure as before to install it to the Charcoal
Grill Lid.
Fig. 21E
Refer to Fig. 21E and attach the Lid Handle to
the Lid with (2) M6x15 bolts.
Fig. 21F
Refer to Fig. 21F, attach charcoal grill lid and
(2) hinge assemblies as shown using (4)
M6X35 Bolts.
Step 22
Note: The lid with smoke stack must be at-
tached to the charcoal grill side.
Fig.22
Step 22: Attach the Damper Control
Knob.
Locate: Damper Control Knob.
Screw the Damper Control Knob into the slot-
ted hole of the Damper Plate. Check to see
that the plate will slide back and forth easily.
20
Advertisement
