KROHNE OPTIWAVE 7300 C Quick Start Manual page 35

OPTIWAVE 7300 C
CSA - Dual Seal-approved
(approval for Drop antenna,
hygienic antenna and fieldbus
output options pending)
NEPSI (approval for Hygienic
antennas pending)
CEPEL / INMETRO (pending)
Other standards and approvals Other standards and approvals
Other standards and approvals Other standards and approvals
EMC
R & TTE
FCC Rules
Industry Canada
LVD
NAMUR
WHG (pending)
Construction code
1 The device has a distance piece if it has the flange options that follow: 6¨ in 300 lb, 3¨...4¨ in 600 lb and 1½¨...4¨ in 900 lb
2 This option is not available for FM- or CSA-approved devices
3 Hastelloy® is a registered trademark of Haynes International, Inc.
4 Tri-Clamp® is a registered trademark of Ladish Co., Inc. BioControl® is a registered trademark of Neumo-Ehrenberg-Group.
5 Kalrez® is a registered trademark of DuPont Performance Elastomers L.L.C.
6 Metaglas® is a registered trademark of Herberts Industrieglas, GMBH & Co., KG
7 HART® is a registered trademark of the HART Communication Foundation
04/2010 - 4000050003 - QS OPTIWAVE 7300 R06 en
CEC Section 18 (Zone ratings) CEC Section 18 (Zone ratings) CEC Section 18 (Zone ratings) CEC Section 18 (Zone ratings)
Cl. I, Zone 1, Ex d, IIC (Probe: Zone 0) T6...T3;
Cl. I, Zone 0, Ex ia, IIC T6...T3;
Cl. I, Zone 2, Ex nA, IIC T6...T3
CEC Section 18 and Annex J (Division ratings) CEC Section 18 and Annex J (Division ratings) CEC Section 18 and Annex J (Division ratings) CEC Section 18 and Annex J (Division ratings)
XP-IS, Cl. I, Div. 2, Gr. ABCD; Cl. II, Div. 2, Gr. FG; Cl. III, Div. 2 T6...T3;
IS, Cl. I, Div. 1, Gr. ABCD; Cl. II, Gr. FG; Cl. III T6...T3
Ex dia IIC T3...T6; Ex ia IIC T3...T6
BR-Ex ia IIC T3...T6; BR-Ex d[ia] IIC T3...T6
Electromagnetic Compatibility Directive 2004/108/EC in conjunction with
EN 61326-1 (2006)
Radio Equipment and Telecommunications Terminal Equipment Directive
1999/5/EC in conjunction with ESTI EN 302 372 (2006)
Part 15
RSS-210
Low-Voltage Directive 2006/95/EC in conjunction with EN 61010-1 (2001)
NAMUR NE 21 Electromagnetic Compatibility (EMC) of Industrial Process and
Laboratory Control Equipment
NAMUR NE 43 Standardization of the Signal Level for the Failure Information of
Digital Transmitters
In conformity with the German Federal Water Act, §9
On request: NACE MR0175 / ISO 15156
www.krohne.com
TECHNICAL DATA
5
35