KROHNE OPTIWAVE 7300 C Quick Start Manual page 17

OPTIWAVE 7300 C
Figure 2-18: Tri-Clamp
1 Tank socket
2 Band clamp
• Make sure the tank connection is level.
• Make sure that you use the applicable gasket for the connection dimensions and the process.
• Align the gasket correctly.
• Lower the antenna carefully into the tank.
• Attach the band clamp to the process conection.
• Tighten the band clamp.
DIN 11851
Equipment needed:
• Device
• Gasket (not supplied)
• DIN 11851 nut
Figure 2-19: DIN 11851 connection
1 Tank socket
2 Nut for DIN 11851 connection
04/2010 - 4000050003 - QS OPTIWAVE 7300 R06 en
®
connection
www.krohne.com
INSTALLATION
2
17