Table of Contents
Advertisement
6.3.1.4.3
Creating a Backup of the Current Configuration
The current configuration loaded into the iPAM400 is saved in the /dva/config/CurrentConfig.cfg
file. A backup copy of this configuration file can be created. This function can be used before any system
update in order to ensure that a backup of the current configuration has been made.
To Create a Backup of the Current Configuration:
1.
Run the Setup Tool as follows, if not already running.
a.
Connect to the iPAM400 either remotely or locally, as described in Section "6.2 Connecting to
the iPAM400" (page 59).
b.
Run the Setup Tool by entering the following command: /dva/bin/vipet_setup
2.
Choose the "System Setup" from the main menu by entering "4".
3.
Choose the "Back Up Configuration" from the system setup menu by entering "3".
The /dva/config/CurrentConfig.cfg will be backed up as
/dva/config/PreviousConfig.cfg.
4.
If no further tasks are to be performed, then return to the main menu (if not already done) and enter
"X" to exit the Setup Tool.
iPAM400 – Product Manual
U-0629-0171.doc – Issue: 04 complete, approved
Page 74 of 138
Advertisement
Table of Contents
Need help?
Do you have a question about the iPAM400 and is the answer not in the manual?
Questions and answers