Table of Contents
Advertisement
Port LED
The port LEDs are located on the front panel to indicate the port selection or computer connection status.
•
Online – Lights up in WHITE to indicate that the computer attached to its corresponding port is up and
running.
•
Selected – Turns GREEN to indicate that the computer attached to its corresponding port has the KVM
focus.
Note: Port LEDs will flash constantly when a chassis intrusion is detected. For details, see
Intrusion Detection
test status. For details, see
CAC LED
The CAC LED is located on the front panel to indicate CAC reader selection or connection status.
•
Green LED: A supported USB authentication device is connected.
•
Green LED Blinking: The connected USB device is rejected, such as a USB thumb drive, USB camera, and
so on.
CAP: The LED is lit (Green) to indicate that Caps Lock Function has been turned on.
CAP
NUM: The LED is lit (Green) to indicate that Num Lock Function has been turned on.
NUM
PWR: The LED is lit (Green) to indicate that the Secure Switch is powered on
PWR LED
This Video LED(s) lights green when the video connection is up and running.
Video
LED(s)
The LED flashes when a non-qualified monitor is connected.
Note: With the dual-display model, each console video connection has a video LED
Chassis Intrusion Detection
To help prevent malicious tampering with the Secure Switch, when a chassis intrusion, such as the cover
being removed, is detected, the Secure Switch becomes inoperable, and front panel LEDs flash GREEN
continuously.
The Chassis Intrusion Detection is an always-on function. If all your front panel LEDs flash continuously,
or the Secure Switch's enclosure appears breached, DO NOT use this product and contact your Raritan
dealer immediately.
14
(on page 14). Port LEDs also indicate the status of the Secure Switch's self-
Operation
(on page 12).
Chassis
Advertisement
Table of Contents
