Introduction; Support; Product Description - Husqvarna AUTOMOWER 320 NERA Operator's Manual

2.1 Introduction

Serial number:
Product number:
PIN code:
The serial number and the product number are on the product rating plate and on the product carton.
• Register your product on www.husqvarna.com. Enter the serial number of the product, the product number and
the date of purchase to register your product.

2.2 Support

For support about the product, speak to your Husqvarna
servicing dealer.

2.3 Product description

Note:
Husqvarna regularly updates the appearance
and function of the products. Refer to
6 .
The product is a robotic lawn mower. The product has a
battery power source and operates automatically. When
the battery state of charge is low the product goes to the
charging station to charge. The product starts to operate
again when the battery is fully charged.
The movement pattern of the product is random, which
means that the lawn is cut equally and with less
wear. The frequent cutting technique improves the grass
quality and decreases the use of fertilizers. Collection of
grass is not necessary.
2.3.1 Installation method
You can install the product with a boundary wire or
™
with an EPOS Plug-in Kit
1 ™
The EPOS Plug-in Kit and the installation kit for the boundary wire are not included.
6 - Introduction
2 Introduction
Support on page
1
. A boundary wire is not
necessary if you install the product with the EPOS
Plug-in Kit.
For installation of the boundary wire, refer to
on page 11 . For installation of the EPOS
Kit, read the operator's manual that is included with the
™
EPOS Plug-in Kit.
®
2.3.2 Automower
®
Automower Connect is a mobile application that makes
it possible to select the operation settings remotely.
®
Automower 320 NERA can connect to the app with
®
Bluetooth and Wi-Fi. Automower
can connect to the app with Bluetooth
cellular connectivity. When you are near the product
you can connect your mobile device and the product
®
with Bluetooth . When the product is connected to your
Wi-Fi network or to the cellular network you can control
the product from everywhere. You can also make the
settings of the product. Refer to
app on page 16 .
®
2.3.3 Automower
®
Automower Access is the user interface of the product,
it includes the display, the jog wheel, the START
button and the STOP button. In Automower
you can set the cutting height and start, stop and
park the product. Refer to
®
Automower Access on page 10 .
®
2.3.4 Automower
(AIM)
®
Automower Intelligent Mapping (AIM) is available in the
®
Automower Connect app. Use Automower
Mapping (AIM) to make a virtual map of your lawn and
installation. In the map you can make virtual work areas
and stay-out zones. Refer to
Mapping (AIM) on page 24 .
Installation
™
Plug-in
Connect
®
430X/450X NERA
®
, Wi-Fi and
®
Automower Connect
Access
®
Access
Menu structure overview in
Intelligent Mapping
®
Intelligent
®
Automower Intelligent
2071 - 001 - 29.03.2023
™