Clean The Product - Husqvarna AUTOMOWER 320 NERA Operator's Manual

To prepare
Examine the skid plate and skid plate bearing.
Examine the rubber bellows in the cutting height adjustment system.
Examine the rubber bellows for the collision columns.
Replace the rubber bellows for the collision columns.
Examine and clean the airflow filter.
Replace the airflow filter.
Do a check of the tightening torque of chassis screws.
Open the chassis and replace all sealing strips.
Last step
Use a software service tool to do a function test of the functions of the product.

6.3 Clean the product

CAUTION:
washer to clean the product. Do not use
solvents for cleaning.
The product does not operate satisfactorily in slopes if
the wheels are blocked with grass. Clean the product
with a brush or running water from a water hose.
Husqvarna recommends to use a special cleaning and
maintenance kit. Speak to your Husqvarna servicing
dealer for more information.
6.3.1 To clean the body, chassis and blade
disc
Examine the blade disc and blades weekly. To clean the
product fully, the top cover and the body of the product
can be removed. If the product is dirty, use a weak soap
solution if necessary. Use a brush or a water hose to
clean the product. Do not use a high-pressure washer to
clean the product.
1. Set the product to OFF.
2. Carefully pull the top cover at the rear, the middle
and the front.
28 - Maintenance
Do not use a high-pressure
Weekly
3. Hold the chassis with one hand and remove the
body with a fast and short pull upwards and
towards the front of the product.
WARNING:
between the body of the product and
the chassis, there is a risk of injury.
Every Every
year third year
O
O
O
O
O
O
O
O
O
If your hands come
2071 - 001 - 29.03.2023