Battery; Replacement Of The Blades - Husqvarna AUTOMOWER 320 NERA Operator's Manual

4. Put the body of the product adjacent to the chassis
of the product or tilt it against a wall.
5. Put the product onto its side.
6. Clean the blade disc bellows for the blade disc and
chassis with a brush. At the same time, make sure
that the blade disc rotates freely. Make sure that
the blades are not damaged and can pivot freely.
6.3.2 To clean the wheels
The product does not operate satisfactorily in slopes if
the wheels are blocked with grass.
• Use a soft brush to clean the wheels.
• If it is necessary, remove the wheel cover with a
flat screwdriver.
2071 - 001 - 29.03.2023
6.3.3 To clean the charging station
WARNING:
supply from the power outlet before
maintenance, or when you clean the
charging station or power supply.
• Remove grass, twigs and other objects from the
charging station.
• Use a brush or a water hose to clean the charging
station.

6.4 Battery

CAUTION:
before you put the product into storage. If
the battery is not fully charged it can cause
damage to the battery.
If the operating time of the product is shorter than usual
between charges, this means that the battery is at the
end of its life cycle. Replace the battery to extend the
operating time.
Note:
The battery life is related to the length of
the season and how many hours a day the product
operates. A long season or many hours of operation
a day means that the battery must be replaced more
regularly.

6.5 Replacement of the blades

WARNING:
guarantee safety if you use Husqvarna
original blades with the embossed crowned
H-mark logotype.
Disconnect the power
Charge the battery fully
Husqvarna can only
Maintenance - 29