Table of Contents
Advertisement
D12 M6*12 x 4pcs.
B21 S13-14-15 x 1pc.
STEP 3:
1. First fasten the upper segment wire (E09) and the lower segment wire (E10) as shown in the figure,
and then use the hex wrench (B20) two-in-one screw (D12*4) to fix the electronic meter group (F) on
the instrument tube group (A02) and lock it. CAUTION: Be careful not to catch the wire!
2. Fix it on the left crank (B01) with a cross wrench (B21) and left pedal (C45).
3. Fix it on the right crank (B02) and lock it with a cross wrench (B21) and right pedal (C46).
IMPORTANT: Ensure the L/R pedals are installed on the correct sides. The will be labeled L or R. Right
pedals are installed with a clockwise turn and Left Pedals are installed with an counterclockwise turn.
Make sure the pedals are fully tighten so it does not loosen and damage the thread when in use.
4. Fasten the front foot cover (C28) on the main frame assembly (A), as shown in the figure.
D12
B20
C28
D12
D24
B20 S5 x 1pc.
F
EO9
E10
A02
B02
B01
C45
B21
A
C46
ASSEMBLY INSTRUCTIONS |
9
Advertisement
Table of Contents
