Advertisement
Available languages
Available languages
14. PAN control
It adjusts the amount of channel signal sent to the left versus the right outputs. Use it to position the sound
origin in a panoramic stereo scene.
15. MONO CHANNEL FADER LEVEL control
It adjusts the level of the channel signal and send it to the MAIN MIX outputs.
16. LINE (L MONO – R) jack inputs
These are female JACK connectors that accepts a balanced or unbalanced line level input signal from almost
any line source. If the R jack is not inserted, the L channel operates as a MONO channel with this input as a
single signal source. Wiring is the same of previous paragraphs.
17. STEREO IN MINI JACK input
This is a MINI JACK (3.5mm) female connector that accepts a STEREO MINI JACK plug from Computer / Tablet
/ Cell phone / MP3 players. The MINI JACK is wired as follows:
Tip = positive signal of left channel
Ring = positive signal of right channel
Sleeve = shield or ground
This input is wired in parallel to the input of the first stereo channel (3/4 of PLAYMIX6, 5/6 of PLAYMIX8, 7/8
of PLAYMIX10): both inputs can be listened simultaneously, but we recommend using only one of the two at
a time.
18. BAL control
It adjusts the amount of channel signal sent to the left versus the right outputs if the channel is used as
MONO, or it fades the LEFT or RIGHT signal amount if the channel is used as STEREO.
19. STEREO CHANNEL LEVEL control
It adjusts the level of the STEREO channel signal and send it to the MAIN MIX outputs.
20. FX/AUX send control
This control sends the signal to the internal Digital Multieffect processor and to the AUX SEND output. This
signal is post-level control and is the sum of both L&R channels.
21. AUX SEND jack output
This jack connector sends out unbalanced line-level signals made of the sum of the input channel's FX sends,
usually for connecting to an external effect device or a stage monitor. This signal is post-fader or, in other
words, it depends on the position of the channel's FADER.
22. FX PRESETS selector
Rotating this knob is possible to select the DSP effects.
23. FX DISPLAY number
This display shows the number of the currently loaded preset. When rotating the FX PRESETS selector, the
display scrolls the numbers and flashes until the new preset is confirmed by pressing the knob.
8
Advertisement
Chapters
