Table of Contents
Advertisement
KIT
CONTENTS.TS
1
Fuselage
2
Left wing panel
3
Right wing panel
4
LED lights
5
Tail set
6
Wheel pants(2)
7
Seat(2)
8
landing gear
9
Tail wheel
10
Struts
11
Cowling
12
Fuel tank
13
canopy
14
Wheels and spinner
15
Aluminum wing tube
16
Pilots
17
Hardware bag included
18
Ep conversion pack
19
Engine mount
ADDITIONAL ITEMS REQUIRED.
0.75- 0.91
0.91 - 1.10
Computer radio with 8 servos.
Glow plug to suit engine.
Propeller to suit engine.
Protective foam rubber for radio
system.
TOOLS & SUPPLIES NEEDED.
Thick cyanoacrylate glue.
30 minute epoxy.
5 minute epoxy.
Hand or electric drill.
Assorted drill bits.
Modelling knife.
Straight edge ruler.
2mm ball driver.
Phillips head screwdriver.
220 grit sandpaper.
90° square or builder's triangle.
Wire cutters.
Masking tape & T-pins.
Thread-lock.
Paper towels.
Fiberglass control horn.
2-stroke.
4-stroke.
INSTALL FLAP CONTROL HORN.
Install the flap control horn using the same
method as same as the aileron control horns.
Fiberglass control horn.
INSTALL THE AILERONS CONTROL
HORN.
Aileron control horn.
Epoxy
Epoxy
3
Advertisement
Table of Contents
