Inserting The Batteries - EKF Diagnostics SensLab Lactate Scout Vet Instruction Manual

1.3 Inserting the batteries

The Lactate Scout Vet requires two CR2450
(3V lithium button cell) batteries.
The device is supplied with batteries included.
Firstly, remove both of the battery
insulating strips . The device is now
1
ready to use.
Replacing Batteries
The measuring device must be turned off to
replace the batteries. Gently push the battery
cover on the back outwards. Remove the
discharged batteries. When inserting the new
batteries, ensure that the polarity is correct.
Push the battery cover back in until it
completely locks into place
If the time to replace the batteries exceeds
30 seconds, the date and time setting will be
lost and must be re-entered. However, any
stored data and settings will be retained.
.
2
1
2
PLEASE NOTE
Used batteries must not be disposed of
with household waste. End users should
follow local regulation regarding the recycling
of batteries to help reduce the environmental
impact that waste batteries have on our planet.
10